Screw L/D RatioL/D21.42018.8
Space Between Tie Barsmm720×720
Max. Mold Heightmm800
Min. Mold Heightmm280
Max. Pump PressureMpa16
Pump Motor PowerKW37
Oil Tank CapacityL750
Platen Dimensions Face
Platen Dimensions Side
1. Designed by 3D software, structural strength are verified
2. T slot,threaded holes for mold installation
3. Hydraulic system with a self sealing oil suction filter and adopted the bypass filter device
4. The system robustness is strong, running stability
5. Timely and effective after-sales service
Servo motor injection molding machine is for normal type plastic material injection, e. g. PC, PP, PE, Nylon, A. B. S. PVC etc. This machine is mainly used to produce small industrial parts, household appliances and other plastic products.The machine is with servo motor to save power, compare with standard machine, according to specific products, the servo motor machine can save power 30% to 70%.
1) Double cylinder balancing injections
2) High-torque oil-motor preplasticizing
3) Five pivots minus relief angle, double toggles, machine hinge
4) Cabinet-type holder integrates the mold plate
5) Oil motor driven gear mold adjusting
6) Storage-type grease lubricating
7) Pressure and flow whole-proportion running
8) High-performance, low-noise oil pump
9) Multi-step pressure and speed adjusting
10) High-precision position linear transducer
11) Digital memory for mold group
1) Four injection pressures and speeds with three additional pressures and speeds
2) Suck back function
3) Cold start protection
4) Pre-suck back function
5) Linear displacement transducer accurately monitor injection position, providing optimum. injection accuracy and control
6) Temperature control
7) Heating Status indication
1) Three clamp close and open pressures and speeds
2) Mold protection function
3) Hydraulic ejector stroke controlled by transducer
4) Automatic hydraulic die-height adjustment driven by planetary gears system
5) Adjustable support under moving platen
6) Automatic high pressure toggle lubrication with low oil level alarm
7) Mechanical, electrical and hydraulic safety interlock devices
8) Linear displacement transducer controls clamping position
1) Independent core in / out pressure and speed
2) Hydraulic unscrewing sequence
3) Hydraulic oil high temperature alarm
4) System pressure gauge
5) Shot counter and reset function
6) Malfunction alarm light
7) Self-diagnostic function
8) Emergency stop buttons placed both front and rear of the machine to provide easy access
World famous brand components for this machine
Hydraulic valve: American Vickers
Hydraulic pump: Japan Sumitomo
Electric element: Schneider/Omron/FUJI
Controller: Taiwai Techmation
Five-star Hydraulic Motor: Intermot
Our sales network
Q: Can your machine meet our need well?
A: yes, we will supply you a proposal as to your specific requirement, and each machine is customized to satisfy customer’s need well.
Q: How can you ensure the machine’s quality if we put the order?
A: Our factory with TUV management system, all machines are manufactured on standard procedure, and we have experience QC department, to check every machine 3 times before shipment. And our engineers all have more than 10 years experience, ensure the machines’ quality and stability.
Q: What would you offer before i arrange balance payment?
A: After machine ready, we would send machine photos and video to you check , if you have mold , we would test mold and send samples to you too, you are also welcome to come to our factory to check machine running by yourself, or by any third part inspection organization authorized by your side.
Q: How about the spare parts?
A: Two year free spare parts would shipped with machines,and if you need new spare parts, send us message, we would arrange it within 24 hours by DHL/UPS service.
Q: How to send my enquiry?
A: You can contact us by email, phone call, Instant Messenger(Whatsapp, wechat,skype).
Q: How long can i get feedback after enquiry?
A: We will reply you within 10hrs in working day.
Q: Where is your factory located? How can i visit there?
A: Our factory is located in Fenghua Ningbo city, Zhejiang Province, China. There has flight from Shanghai(one hour), Guangzhou (2 hours), Shen Zhen(2 hours) to our city. Train from Shanghai to our city (3 hours), Welcome to visit our factory.
Q: Payment term?
A: 30% by T/T as down payment , balance 70% by T/T before delivery. We also can do L/C at sight.Servo Injection Moulding Machine