• astao219 publicou uma atualização 4 anos, 3 meses atrás

    Product Parameters
    INJECTION UNITIT3980
    ABC
    INJECTION UNIT
    Screw Diametermm707580
    Screw L/D RatioL/D21.42018.8
    Shot Size(Theoretical)cm3129314851689
    Injection Weight(PS)g117713511537
    Injection Rateg/s366395446
    Plasticizing Capacityg/d606570
    Injection PressureMpa199173152
    Screw Speedrpm0~165
    CLAMPING UNIT
    Clamp TonnageKN3980
    Toggle Strokemm700
    Space Between Tie Barsmm720×720
    Max. Mold Heightmm800
    Min. Mold Heightmm280
    Ejector Strokemm160
    Ejector TonnageKN110
    Ejector NumberPiece13
    OTHERS
    Max. Pump PressureMpa16
    Pump Motor PowerKW37
    Heater PowerKW23.2
    Machine Dimensions(L×W×H)m7.3×1.9×2.5
    Machine Weightt15.7
    Hopper CapacityL50
    Oil Tank CapacityL750
    Platen Dimensions Face
    Platen Dimensions Side
    Machine Dimensions
    Competitive Advantages
    1. Designed by 3D software, structural strength are verified
    2. T slot,threaded holes for mold installation
    3. Hydraulic system with a self sealing oil suction filter and adopted the bypass filter device
    4. The system robustness is strong, running stability
    5. Timely and effective after-sales service
    Quick Detail
    Servo motor injection molding machine is for normal type plastic material injection, e. g. PC, PP, PE, Nylon, A. B. S. PVC etc. This machine is mainly used to produce small industrial parts, household appliances and other plastic products.The machine is with servo motor to save power, compare with standard machine, according to specific products, the servo motor machine can save power 30% to 70%.
    About Products
    Introduciton
    1) Double cylinder balancing injections
    2) High-torque oil-motor preplasticizing
    3) Five pivots minus relief angle, double toggles, machine hinge
    mold locking
    4) Cabinet-type holder integrates the mold plate
    5) Oil motor driven gear mold adjusting
    6) Storage-type grease lubricating
    7) Pressure and flow whole-proportion running
    8) High-performance, low-noise oil pump
    9) Multi-step pressure and speed adjusting
    10) High-precision position linear transducer
    11) Digital memory for mold group
    Injection Unit
    1) Four injection pressures and speeds with three additional pressures and speeds
    2) Suck back function
    3) Cold start protection
    4) Pre-suck back function
    5) Linear displacement transducer accurately monitor injection position, providing optimum. injection accuracy and control
    6) Temperature control
    7) Heating Status indication
    Clamping Unit
    1) Three clamp close and open pressures and speeds
    2) Mold protection function
    3) Hydraulic ejector stroke controlled by transducer
    4) Automatic hydraulic die-height adjustment driven by planetary gears system
    5) Adjustable support under moving platen
    6) Automatic high pressure toggle lubrication with low oil level alarm
    7) Mechanical, electrical and hydraulic safety interlock devices
    8) Linear displacement transducer controls clamping position
    Other parts
    1) Independent core in / out pressure and speed
    2) Hydraulic unscrewing sequence
    3) Hydraulic oil high temperature alarm
    4) System pressure gauge
    5) Shot counter and reset function
    6) Malfunction alarm light
    7) Self-diagnostic function
    8) Emergency stop buttons placed both front and rear of the machine to provide easy access
    World famous brand components for this machine
    Hydraulic valve: American Vickers
    Hydraulic pump: Japan Sumitomo
    Electric element: Schneider/Omron/FUJI
    Controller: Taiwai Techmation
    Five-star Hydraulic Motor: Intermot
    Our sales network
    FAQ
    Q: Can your machine meet our need well?
    A: yes, we will supply you a proposal as to your specific requirement, and each machine is customized to satisfy customer’s need well.
    Q: How can you ensure the machine’s quality if we put the order?
    A: Our factory with TUV management system, all machines are manufactured on standard procedure, and we have experience QC department, to check every machine 3 times before shipment. And our engineers all have more than 10 years experience, ensure the machines’ quality and stability.
    Q: What would you offer before i arrange balance payment?
    A: After machine ready, we would send machine photos and video to you check , if you have mold , we would test mold and send samples to you too, you are also welcome to come to our factory to check machine running by yourself, or by any third part inspection organization authorized by your side.
    Q: How about the spare parts?
    A: Two year free spare parts would shipped with machines,and if you need new spare parts, send us message, we would arrange it within 24 hours by DHL/UPS service.
    Q: How to send my enquiry?
    A: You can contact us by email, phone call, Instant Messenger(Whatsapp, wechat,skype).
    Q: How long can i get feedback after enquiry?
    A: We will reply you within 10hrs in working day.
    Q: Where is your factory located? How can i visit there?
    A: Our factory is located in Fenghua Ningbo city, Zhejiang Province, China. There has flight from Shanghai(one hour), Guangzhou (2 hours), Shen Zhen(2 hours) to our city. Train from Shanghai to our city (3 hours), Welcome to visit our factory.
    Q: Payment term?
    A: 30% by T/T as down payment , balance 70% by T/T before delivery. We also can do L/C at sight.Servo Injection Moulding Machine
    website:http://www.intimeplasticmachine.com/injection-moulding-machine/servo-injection-moulding-machine/

CONTATO

Envie uma mensagem e responderemos o mais breve possível.

Enviando

©2024 i9Startups - Plataforma de ignição da sua idéia.

ou

Fazer login com suas credenciais

ou    

Esqueceu sua senha?

ou

Create Account